Sweco Fab., a division of PT&P, designed and fabricated this 108″ diameter storage tank that will be submerged inside a containment tank for a chemical plant in Texas. The storage tank is fabricated from 1/2″ thick SA516-70 carbon steel and is 240″ in length. The containment water tank measures 295″ L x 124″ W x 128″ H. The storage tank is designed for 100 PSIG at 130°F internally and 15 PSIG at 130°F externally. The storage tank was hydro tested for 1 hour at 150 PSI and a full radiography test was done prior to shipment.
Live New Webinar
Sign-up for a Live Technical Webinar…
Slide Plates & Pipe Rollers in the Fight Against Friction
Date: Thursday, May 23, 2024 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
Discover the secret to a lower coefficient of friction while permitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers. See numerous photos featuring combinations with other critical pipe supports in order to allow for movement or a low coefficient of friction. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your slide plate and pipe roller needs can be taken care of by our 24×7 web-based emergency services, field service, and quick turnaround time when you need it most.
Upcoming Webinars:
May 30th: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
June 6th: Pipe Clamp Design, Application & Installation Webinar 10:00 am OR 2:00 pm
June 13th: U.S. Bellows 101 - The Basics of Expansion Joints 10:00 am OR 2:00 pm
Online Course
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits