Constant Spring Supports Designed for up to 9-1/2” of Travel

November 18, 2019

 

Constant Spring Supports Designed For Up To 9-1/2” Of Travel

Type: Constant Spring Supports
Size: 29″ L x 14″ W x 18-3/4″ H |  76″ L x 26″ W x 37-3/8″ H
Material: A36 Carbon Steel | HDG | Neoprene
Design: 124 lb. to 10,570 lb. Load | 3-1/2″ to 9-1/2″ Travel
Testing: Q.C. Inspection | Load and Travel Tests

PT&P designed and manufactured U-Type and D-Type constant spring supports for a facility in Mexico. The constants frames are fabricated from A36 carbon steel and have a hot-dipped galvanized coating. The spring coils are alloy steel and have a neoprene coating. The dimensions range from 29” L x 14” W x 18-3/4” H to a max of 76” L x 26” W x 37-3/8” H. The 200-U-Type constants were supplied with graphite plates on the load table. The supports range in load from 124 lb. to 10,570 lb. The total travel ranged from 3-1/2” to 9-1/2”. Standard Q.C., load and travel tests were performed.

Read More

Cryogenic Pipe Supports Designed for an Ammonia Plant

November 5, 2019

 

Cryogenic Pipe Supports Designed For An Ammonia Plant

Type: Cryogenic Pipe Supports
Size: 14” L x 4″ W x 6″ H | 2″ Dia. | 2″ Thick Insulation
Material: Polyurethane & Foam Glass | Galvanized Steel
Testing: Q.C. Inspection & Tests

PT&P manufactured multiple pre-insulated pipe supports for cryogenic temperatures in an ammonia plant in Louisiana. These cryogenic pipe supports, also known as “cold shoes” are designed with 2” thick polyurethane and foam glass for insulation and fabricated from galvanized steel for the shoe, with alloy bolts and nuts. They are 2” diameter 14″ L X 4″ W X 6″ H. These insulated supports are designed for insulating and supporting temperatures down to -300°F with a PSI of 200 to 800. Q.C. inspection and tests were performed prior to shipment.

Read More
Top