RFID Tag for Pipe Supports

February 18, 2000
Rfid Tag For Pipe Supports
RFID Tag for Pipe Supports
Rfid Tag For Pipe Supports
RFID Handheld Reader

Piping Technology & Products, Inc., in conjunction with other sponsors, has completed the first pilot test of Radio Frequency Identification (RFID) technology for the receipt and tracking of pipe supports material at construction jobsites.

The RFID tags and RFID handheld reader used by Piping Technology & Products, Inc. at the Red Hills Power Plant.

Rfid Tag For Pipe Supports
PT&P Pipe Supports in the Field

The material shown here arrived from PT&P’s manufacturing facility in Houston, Texas with an RFID tag affixed to each pipe support assembly.

Rfid Tag For Pipe Supports
PT&P Providing Training to Field Personnel

Piping Technology & Products, Inc. shipped approximately 150 pipe supports to the Red Hills Power Plant with radio frequency identification (RFID) chips affixed to each pipe supports.  The RFID tags and RFID handheld reader were provided by SAT Safetrac.  Field personnel were trained on the use of the new technology.  The RFID-tagged pipe support assemblies were then received by field personnel.  Videos of the RFID receiving process were taken for the purpose of comparative time and motion studies.

Read More

16,000 Lb. 33 1/2" Travel Horizontal Constant Load Hangers

February 10, 2000
16,000 Lb. 33 1/2&Quot; Travel Horizontal Constant Load Hangers
16,000 Lb. 33 1/2" Travel Horizontal Constant Load Hangers

In January 2000, Piping Technology & Products, Inc., a manufacturer of high quality engineered products, designed and built two 33 1/2 inches travel and two 25 inches travel constant load spring hangers. These constant load spring hangers will be in service at a geothermal production well in Hawaii, where they will be used to support a pipe that carries hot water discharged from a geothermal production well to a separator.

16,000 Lb. 33 1/2&Quot; Travel Horizontal Constant Load Hangers
16,000 Lb. 33 1/2" Travel Horizontal Constant Load Hangers

The well will produce 2.8 Million gallons of water per hour at a discharge temperature of 680° F, and a pressure of 2800 psi. These custom designed constant load spring hangers provide extraordinarily large travel distance. The 33 1/2″ travel and the 25″ travel constant load spring hangers are designed to provide a constant 16,000 lbs. and 6,000 lbs support for a pipe moving a vertical distance of 33 1/2″ and 25″ respectively.

Want to learn more about constant hangers? Visit our webinar archives today!


Access-Our-Webinar-Archives

Read More

Specially Fabricated Pipe Supports

Specially Fabricated Pipe Supports
Specially Fabricated Pipe Supports

The photo above shows three different supports fabricated by Piping Technology & Products, Inc. for a petrochemical facility in Indonesia. The smallest support, (lower right) show the interior layer of polyurethane projecting out of the outside layer. This allows the pipe insulation to overlap when installed. These units provide insulation between the very cold fluid inside the pipe and the hot, humid conditions outside. They also support the weight of the pipe and allow for movement due to thermal expansion and contraction. Micarta was used for certain supports which require greater strength.

In need of pipe supports? Let us price one for you today!

Request-A-Quote

Read More

Specially Fabricated Sway Struts and Mechanical Snubbers

February 9, 2000
Specially Fabricated Sway Struts And Mechanical Snubbers
Specially Fabricated Sway Struts and Mechanical Snubbers

The photograph above shows sway struts and mechanical snubbers, which are combined and attached to large pipes and to stable structures. The snubber will dampen shocks and vibrations caused by sudden opening and closing of valves or even earthquakes. Piping Technology & Products, Inc. fabricated these for the steam piping in a power plant.

Are you in need of sway struts and mechanical snubbers for an upcoming project? Get pricing today!

Request-A-Quote

Read More

Galvanized Anchor Bolts

February 2, 2000
Galvanized Anchor Bolts
Galvanized Anchor Bolts

The picture above is of Type-3 galvanized anchor bolts, a standard product in our line of stock anchor bolts. However, Piping Technology & Products can also fabricate customized anchor bolts to meet your materials, diameter and shape specifications for any industry, i.e. refineries, chemical plants, power plants, etc. We specialize in quick turn-around projects and are available on a 24×7 basis to meet your support requirements.

Learn more about galvanized anchor bolts by visiting our webinar archives!




Access-Our-Webinar-Archives

Read More
Top