Sweco Fab, designed and fabricated a high pressure knock-out drum for a refining company in El Paso, Texas. The pressure vessel was designed according to ASME Section VIII Div. 1 codes with an overall height of 351″ and inside drum diameter of 48″. Its main application is to separate the vapor and liquid in the refining process. It contains a fire proofing skirt and a stainless steel demister pad that aids the separation process. The shell is fabricated from 3/8″ thick SA516 Grade 70 carbon steel, and the forge fittings are fabricated from SA105 carbon steel. The knock out drum has an operation temperature of 450°F at 125 psig, and underwent radiography, dye penetrant and hydro-tests before it was shipped.
Live New Webinar
Sign-up for a Live Technical Webinar…
Pipe Support Field Inspection, Installation and Maintenance Webinar
Date: Thursday, May 16, 2024 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on installation and maintenance guidelines and offer valuable tips on inspecting a wide variety of pipe supports and expansion joints in your piping system. We will cover various pipe support applications and point out signs that indicate if a particular support needs replaced or adjusted. Obtain the knowledge you need to avoid the possibility of a potentially catastrophic situation. View examples of real-world problems and see how we were able to solve them with timely and cost-effective solutions.
Upcoming Webinars:
May 23rd: Slide Plates & Pipe Rollers in the Fight Against Friction 10:00 am OR 2:00 pm
May 30th: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
Online Course
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits